|
Model Number (Reverse Cycle)
|
Indoor Unit | S030ILR |
| Outdoor Unit | S030OVR | |
|
Rated Cooling
|
Total Capacity (kW)3 | 31.02 |
| Sensible3 | 25.97 | |
| EER (kW/ikW)3 | 3.6 | |
|
Rated Heating1
|
Total Capacity (kW) | 30.2 |
| COP | 3.6 | |
| MEPS Certified | Yes | |
|
Operating Range
|
Maximum °C | 50 |
| Minimum °C | -10 | |
| Capacity Steps | % | 0/50/100 |
|
Compressor
|
Type | Scroll |
| Starter | D.O.L (Optional Soft Starter) | |
| Qty | 2 | |
|
Outdoor Fan
|
Type | Hybrid Axial |
| Speed Control | Pressure Transducer | |
| Qty | 2 | |
|
Refrigerant System
|
Type | R410A |
| Charge Per Circuit kg | 5.3 | |
| No of Circuits | 2 | |
|
Indoor Fan
|
Type | EC Plug |
| Speed Control | Potentiometer | |
| Qty | 2 | |
|
Airflow Indoor (L/s)
|
Nominal | 1670 |
| Maximum | 2088 | |
| Minimum | 1253 | |
| Available External Static Pressure |
Pa | High Static Capability (See Fan Performance Curves) |
| IP Rating | IP44 | |
| Power Supply | (Volt/Phase/Hz) | 400-415V / 3Ph + N / 50Hz |
| Rated Load Amps4 | Outdoor/Indoor/ Total |
14.7/ 1.1/ 15.8 |
| Full Load Amps5 | Outdoor/Indoor/ Total |
24.2/5.2/29.4 |
|
Outdoor Dimensions (mm)
|
Height | 1190 |
| Width | 1850 | |
| Length | 1425 | |
|
Indoor Dimensions (mm)
|
Height | 690 |
| Width | 1700 | |
| Length | 820 | |
|
Indoor and Outdoor Pipe Connection Diameter
|
Liquid mm (inch) | 9.5 (3/8″) x 2 |
| Gas mm (inch) | 19.1 (3/4″) x 2 | |
| Nominal Weight 2. | Outdoor kg | 382 |
| Nominal Weight 2. | Indoor kg | 200 |
|
Rated Sound Power
|
db(A)
|
66.5
|
Apac S030ILR / S030OVR 31.02 kW Split Ducted Unit (Low Profile)
31.02 kW Cooling | 30.20 kW Heating
Apac S030ILR / S030OVR 31.02 kW Split Ducted Unit (Low Profile)
- High static capability up to 500pa
- Quieter operation with 12db(A) sound reduction
- Condenser coil anti-corrosion protection | MEPS Compliant
5 Years Manufacturer’s Warranty
Features
- Low profile space saving design suitable for in-ceiling installation
- EC direct drive centrifugal blower (12-23kW)
- EC plug fans 024-045 with high static capability up to 500pa
- Hybrid axial fan (12-45kW)
- TXV refrigerant control
- Condenser coil anti-corrosion protection
- Open controls
- 25mm PE closed cell insulation
- Phase fail protection relay
- MEPS certified
Factory options customised to order Outdoor
- Compressor soft starter
- Copper/copper coil(s)
- Capacity modulation control
- High static pressure outdoor fans
- Outdoor coil(s) with anti-corrosion post-treatment
- Outdoor coil guards, powder coated
- Discharge & suction isolation valves
- High Level Interface (HLI) Modbus connectivity
- Cable markers
Indoor
- Double layered insulation to indoor section
- Copper/copper coil(s)
- Indoor coil(s) with anti-corrosion post-treatment
Factory options engineered to order Outdoor
- 316 stainless steel cabinet, unpainted
- 304 stainless steel cabinet, powder coated
- Stainless steel external fixings
- Coil(s) copper / copper
- Power supply – no neutral (415/3/50)
- Ductable air off in lieu of standard axial
Indoor - Stainless steel external fixings
- Coil(s) copper / copper
- Power supply – no neutral (415/3/50)
- R22/R407C application









